ATEX Pioneer Pole System
ATEX Pioneer Pole System - Image 2
ATEX Pioneer Pole System - Image 3
ATEX Pioneer Pole System - Image 4
ATEX Pioneer Pole System - Image 5
ATEX Pioneer Pole System - Image 6
ATEX Pioneer Pole System - Image 7
ATEX Pioneer Pole System - Image 8
ATEX Pioneer Pole System - Image 9
ATEX Pioneer Pole System - Image 10
ATEX Pioneer Pole System - Image 11
ATEX Pioneer Pole System - Image 12
ATEX Pioneer Pole System - Image 13
ATEX Pioneer Pole System - Image 14
ATEX Pioneer Pole System - Image 15
ATEX Pioneer Pole System - Image 16

ATEX Pioneer Pole System

The SpaceVac ATEX Pioneer system sits between the entry-level Lite system and the more advanced professional systems within the SpaceVac ATEX range. It has been designed for facilities requiring greater reach and cleaning flexibility while maintaining full ATEX compliance.

  • ATEX approved for use in gas Zones 0, 1 & 2 and dust Zones 20, 21 & 22
  • Reach up to 6.6m (21 ft) safely from ground level
  • Manufactured under IECEx certified quality processes
  • Compatible with appropriately ATEX-certified vacuum units
SKU: SVA38/EX-PIONEER Categories: ,
3 atex pioneer poles

3 x 38mm x 1.6 m Conductive Pioneer Poles

3 x 38mm ATEX Pioneer Cleaning Poles

Atex Pioneer 38mm Pole

1 x 38mm x 0.8 m Conductive Half Pole

1 x 38mm diameter ATEX Pioneer half cleaning pole

SV-PB Pole Bag

Padded Pole Bag

Padded carry bag for pole system.

SVA38-135H ATEX 135 Degree Head

Conductive 135 Degree Cleaning Head

Conductive 135 Degree ATEX Cleaning Head

SVA38-90H ATEX 90 Degree Head

Conductive 90 Degree Cleaning Head

Conductive 90 Degree ATEX Cleaning Head

SVA38-45H ATEX 45 Degree Head

Conductive 45 Degree Cleaning Head

Conductive 45 Degree ATEX Cleaning Head

SVA38-FLT – Conductve Flat Surface Tool

Conductive 300 mm Flat Surface Tool

Conductive 300mm Flat surface tool for removal of dust and dirt from ATEX certified areas

SVA38-CT ATEX Crevice Tool

Conductive Crevice Tool

Conductive Crevice Tool for removal of combustible dust

SVA38-SRB – Conductive Small Round Brush

Conductive Small Round Brush

Conductive Small Round Brush for removal of combustible dust

Mesh bag

Mesh Bag

Mesh bag for storage and transport of heads and brushes

SVA38-HA – Hose to Pole Adaptor

Conductive Hose to Pole Adaptor

Conductive 38mm hose to pole adaptor

SVA38-5H Conductive Hose

5 metre Conductive Hose

5m conductive vacuum hose

SVA38-50HC – ATEX 38mm Hose Cuff

Conductive 38mm Hose to 50mm Vac Inlet Cuff

Conductive Inlet cuff for connecting hose to Vacuum

SV-HB – Hose Bag

Hose Bag

Hose bag for storage and transport of hose.

Enquire now

The SpaceVac ATEX Pioneer system sits between the entry-level Lite system and the more advanced professional systems within the SpaceVac ATEX range. It has been designed for facilities requiring greater reach and cleaning flexibility while maintaining full ATEX compliance.

Manufactured in the UK using conductive carbon fibre poles, the Pioneer system allows operators to safely remove combustible dust and debris from elevated surfaces while maintaining excellent control and stability.

US Specification: For customers requiring the US version, ATEX poles are manufactured with a dual locking-hole design to meet US specifications and ensure compatibility with US pole systems.

Compatible Vacuums:

  • UK: Titan 2 (110v/230v), Mercury 2 (110v/230v)
  • US: Titan 1 (110v), Titan 2 (RGS), Mercury 2 (110v)
  • Rest of the world: Titan 2 (230v), Mercury 2 (230v). 110v is available on both models if required.

✔ Food manufacturing & processing facilities
✔ Pharmaceutical production environments
✔ Chemical processing plants
✔ Grain handling & milling operations
✔ Powder coating & combustible dust environments
✔ Manufacturing facilities operating in ATEX zones
✔ Hazardous dust extraction applications

  • ATEX approved for use in gas Zones 0, 1 & 2 and dust Zones 20, 21 & 22
  • Reach up to 6.6m (21 ft) safely from ground level
  • Complete kit includes 3 cleaning heads, 1 brush and specialist crevice tools
  • Manufactured under IECEx certified quality processes
  • 100% conductive carbon fibre poles for safe static control
  • Positive-lock accessory system for secure tool engagement
  • Supplied with padded pole bag and conductive hose kit
  • Compatible with appropriately ATEX-certified vacuum units

What's included

Select a system to see what's included.

ATEX Pioneer Pole System

Weight 8 kg
Dimensions (W x L x H) 170 × 24 × 24 cm
Pole Length

1.6m
Pole Diameter

38mm
Safety locking mechanism

Yes
Carbon Blend

Standard Modulus Carbon, 3K 2×2 twill carbon
Enclosed pole length

5.6m / 18ft
Max working height

6.6m / 21ft
SKU SVA38/EX-PIONEER

Datasheets

User Guides

The SpaceVac ATEX Pioneer system provides a standard working height of up to 6.6m (21ft) from ground level. Additional poles can be added where required, allowing operators to safely clean elevated surfaces without the need for ladders or access equipment.

The ATEX Pioneer system is designed for hazardous environments where combustible dust accumulation presents a potential risk. It is ideal for facilities that require regular high-level cleaning of elevated structures while maintaining ATEX compliance.

Typical applications include food manufacturing facilities, pharmaceutical production environments, grain handling operations, chemical processing plants, powder handling facilities and other industrial workplaces operating within ATEX-classified areas.

The system is designed for the safe removal of combustible dust and debris from elevated surfaces including:

  • Ceilings
  • Pipework
  • Ducting
  • Ventilation systems
  • Overhead beams and structures
  • Production equipment exteriors
  • Cable trays
  • Wall surfaces
  • Other areas where combustible dust can accumulate above head height

The kit includes a range of conductive cleaning heads and specialist tools to suit different cleaning challenges.

The ATEX Pioneer offers increased reach, larger diameter poles and enhanced rigidity compared to the ATEX Lite system. This makes it particularly suitable for facilities requiring more frequent high-level cleaning or access to greater working heights while maintaining operator control and ease of use.

The ATEX Pioneer poles are manufactured from 100% conductive carbon fibre. This provides excellent strength, durability and rigidity while allowing static charges to dissipate safely during operation.

In combustible dust environments, controlling static electricity is essential. The conductive carbon fibre construction allows static charges to dissipate safely through the cleaning system, helping support safe cleaning practices in hazardous areas while maintaining lightweight handling characteristics.

The ATEX Pioneer system should be used with an appropriately certified industrial vacuum suitable for the hazardous area classification. SpaceVac commonly recommends compatible systems from the TITAN ATEX and Mercury ACD ranges.

Yes. Additional conductive poles can be added to increase the system’s reach, allowing operators to safely clean higher-level areas while remaining at ground level.

No. The ATEX Pioneer system is designed to allow operators to carry out high-level cleaning safely from ground level, reducing reliance on ladders, scaffolding and other access equipment for routine cleaning tasks.

Yes. The ATEX Pioneer is widely used by facilities maintenance teams, industrial cleaning contractors and specialist service providers working in hazardous environments. Its increased reach and robust construction make it particularly suitable for regular commercial and industrial cleaning operations.

The ATEX Pioneer system is designed for use in hazardous dust and gas environments when paired with appropriately certified equipment. SpaceVac provides solutions suitable for ATEX gas Zones 0, 1 and 2 and dust Zones 20, 21 and 22, helping operators safely remove combustible dust from elevated surfaces while remaining safely at ground level.

Compatible Certified Vacuum Units

SpaceVac ATEX systems must be paired with a certified industrial vacuum suitable for the hazardous zone classification of your facility. Select from our compatible ATEX-rated vacuum units below to ensure safe operation and regulatory compliance.
  • Mercury 2 - ACD Vacuum

    Mercury 2 – ACD Vacuum

    View Product
  • Titan 1 (US) - ATEX Vacuum

    Titan 1 (US) – ATEX Vacuum

    View Product
  • Titan 2 US

    Titan 2 (US) – ATEX Vacuum

    View Product
  • Titan 2 - ATEX Vacuum

    Titan 2 – ATEX Vacuum

    View Product

    • Safe cleaning in hazardous environments from the ground

    SpaceVac ATEX cleaning equipment combines lightweight carbon fibre poles with certified vacuum systems and specialist tools for safe, compliant high-level cleaning.

    ATEX Lite

    ATEX Lite

    Certified high-level cleaning for hazardous environments. The SpaceVac ATEX Lite system is designed as an entry-level solution for operators working in combustible dust environments who require safe overhead cleaning without the need for maximum reach systems. Designed and manufactured in the UK, the system provides certified performance for maintenance teams carrying out occasional high-level cleaning tasks in hazardous environments. The lightweight 38mm conductive carbon fibre poles provide excellent operator control while maintaining full ATEX compliance for combustible dust environments. US Specification: For customers requiring the US version, ATEX poles are manufactured with a...

    Pole length: 1.25m
    Pole diameter: 38mm
    Safety locking mechanism: Yes
    Carbon blend: High Modulus Carbon, 3K 2x2 twill carbon
    Enclosed pole length: 3.75m / 12ft
    Max working height: 4.75m / 15ft
    Single pole weight: 232 grams
    Shop Products
    ATEX Pioneer

    ATEX Pioneer

    The SpaceVac ATEX Pioneer system sits between the entry-level Lite system and the more advanced professional systems within the SpaceVac ATEX range. It has been designed for facilities requiring greater reach and cleaning flexibility while maintaining full ATEX compliance. Manufactured in the UK using conductive carbon fibre poles, the Pioneer system allows operators to safely remove combustible dust and debris from elevated surfaces while maintaining excellent control and stability. US Specification: For customers requiring the US version, ATEX poles are manufactured with a dual locking-hole design to meet US specifications and ensure compatibility with US pole systems. Compatible ...

    Pole length: 1.6m
    Pole diameter: 38mm
    Safety locking mechanism: Yes
    Carbon blend: Standard Modulus Carbon, 3K 2x2 twill carbon
    Enclosed pole length: 5.6m / 18ft
    Max working height: 6.6m / 21ft
    Shop Products
    ATEX Pro 38mm

    ATEX Pro 38mm

    Professional Reach and Control Designed for facilities where precision and control are essential, the ATEX Pro 38mm combines lightweight, rigid conductive carbon fibre construction with professional working reach. It is well suited to routine combustible dust cleaning around overhead pipework, cable trays, ducting and production equipment. Why choose ATEX Pro 38mm? Professional reach with lightweight, rigid conductive carbon fibre poles Excellent manoeuvrability around confined spaces and overhead equipment Maintains operator control at extended working heights Ideal for demanding, routine high-level housekeeping

    Pole length: 1.6m
    Pole diameter: 38mm
    Safety locking mechanism: Yes
    Carbon blend: High Modulus Carbon, 3K 2x2 twill carbon
    Enclosed pole length: 8.8m / 29ft
    Max working height: 9.8m / 32ft
    Single pole weight: 290 grams
    Shop Products
    ATEX Pro 50mm

    ATEX Pro 50mm

    Certified high-level cleaning for hazardous environments. Developed in response to fatal incidents caused by incorrect cleaning equipment used in explosive atmospheres, the SpaceVac ATEX Pro 50mm system is engineered for safe, ground-based high-level cleaning. Designed and manufactured in the UK, the system delivers certified performance, strength and control when removing hazardous dust and debris from elevated surfaces. The 50mm pole diameter is best for increased suction and removal of heavier dust deposits and debris. US Specification: For customers requiring the US version, ATEX poles are manufactured with a dual locking-hole design to meet US specifications and ensure compatibili...

    Pole length: 1.6m / 5ft 2”
    Pole diameter: 50mm / 2”
    Carbon material: 100% Carbon
    No of poles enclosed: 5.5
    Enclosed pole length: 8.8m / 29ft
    Max working height: 9.8m / 32ft
    Shop Products
    ATEX Ultra

    ATEX Ultra

    Certified high-level cleaning for hazardous environments. The SpaceVac ATEX Ultra system is the most advanced high-reach solution within the ATEX cleaning range, designed for facilities requiring safe cleaning at significant height. Manufactured using ultra-high modulus carbon fibre construction, the Ultra system delivers exceptional strength and rigidity while remaining lightweight for the operator. This allows operators to safely remove combustible dust from overhead structures such as beams, ducting, pipework and production equipment while maintaining full ATEX compliance. US Specification: For customers requiring the US version, ATEX poles are manufactured with a dual locking-hole ...

    Pole length: 1.6m
    Pole diameter: 38mm
    Safety locking mechanism: Yes
    Carbon blend: Ultra high modulus carbon fibre
    Enclosed pole length: 15m / 49ft
    Max working height: 16m / 52ft
    Single pole weight: 300 grams
    Shop Products

    Compatible Certified Vacuum Units