ATEX Lite Pole System
ATEX Lite Pole System - Image 2
ATEX Lite Pole System - Image 3
ATEX Lite Pole System - Image 4
ATEX Lite Pole System - Image 5
ATEX Lite Pole System - Image 6
ATEX Lite Pole System - Image 7
ATEX Lite Pole System - Image 8

ATEX Lite Pole System

A lightweight ATEX solution for occasional high-level cleaning in combustible dust environments.

The ATEX Lite Pole System is designed for occasional cleaning at lower working heights in environments where combustible dust may be present.

Manufactured using conductive carbon fibre poles, the system provides a lightweight solution for removing dust and debris from overhead surfaces when paired with an appropriately certified vacuum.

  • 4.75m (15ft) standard working height
  • Extendable to 7.25m (24ft) with two additional poles
  • Lightweight 232g conductive carbon fibre poles
  • Manufactured in an IECEx-certified facility
SKU: SVA38/EX-LITE Categories: ,
3 Atex Lite Poles

3 x 38mm x 1.25 m Conductive Lite Poles

3 x ATEX Lite Cleaning Poles

SV-LPB Lite Pole Bag

1 x Lite Pole Bag

Carry bag for Lite pole system

SVA38-FLT – Conductve Flat Surface Tool

Conductive 300 mm Flat Surface Tool

Conductive 300mm Flat surface tool for removal of dust and dirt from ATEX certified areas

SVA38-SRB – Conductive Small Round Brush

Conductive Small Round Brush

Conductive Small Round Brush for removal of combustible dust

SVA38-90H ATEX 90 Degree Head

Conductive 90 Degree Cleaning Head

Conductive 90 Degree ATEX Cleaning Head

SVA38-45H ATEX 45 Degree Head

Conductive 45 Degree Cleaning Head

Conductive 45 Degree ATEX Cleaning Head

Mesh bag

Mesh Bag

SV/MB

Durable mesh carry bag for storing and transporting cleaning heads and brushes.

SVA38-5H Conductive Hose

5 metre Conductive Hose

5m conductive vacuum hose

SVA38-HA – Hose to Pole Adaptor

Conductive Hose to Pole Adaptor

Conductive 38mm hose to pole adaptor

SVA38-50HC – ATEX 38mm Hose Cuff

Conductive 38mm Hose to 50mm Vac Inlet Cuff

Conductive Inlet cuff for connecting hose to Vacuum

SV-HB – Hose Bag

Hose Bag

Hose bag for storage and transport of hose.

Enquire now

Practical ATEX High-Level Cleaning for Occasional Use

The ATEX Lite Pole System is designed for occasional cleaning at lower working heights in combustible dust environments.

Manufactured in the UK at an IECEx-certified facility, its lightweight conductive carbon fibre poles provide easy handling and support static dissipation when paired with appropriately certified equipment.

With a standard working height of 4.75m, extendable to 7.25m, the system enables operators to clean overhead pipework, ceilings, vents and ducting from ground level.

✔ Food manufacturing and processing facilities

✔ Bakeries and flour handling environments

✔ Grain handling and milling operations

✔ Powder processing and packaging facilities

✔ Manufacturing facilities with combustible dust risks

✔ Maintenance teams carrying out occasional high-level cleaning

✔ Facilities requiring cleaning at lower working heights

This gives Lite a clearer position within the range.

✔ Lightweight 232g carbon fibre poles – Designed for easy handling and manoeuvrability during occasional cleaning tasks.

✔ 100% conductive carbon fibre construction – Supports static dissipation when used with appropriately certified equipment.

✔ Manufactured in an IECEx-certified facility – Produced under certified quality processes for equipment intended for hazardous environments.

✔ Designed for occasional ATEX cleaning – Ideal for facilities requiring periodic high-level cleaning at lower working heights.

What's included

Select a system to see what's included.

ATEX Lite Pole System

Weight 6 kg
Dimensions (W x L x H) 141 × 28 × 28 cm
Pole Length

1.25m
Pole Diameter

38mm
Safety Locking Mechanism

Yes
Carbon Blend

High Modulus Carbon, 3K 2×2 twill carbon
Enclosed Pole Length

3.75m / 12ft
Max Working Height

4.75m / 15ft
Single Pole Weight

232 grams
SKU SVA38/EX-LITE

Datasheets

Technical Information

The SpaceVac ATEX Lite system provides a standard working height of up to 4.75m (15ft) from ground level. For applications requiring additional reach, the system can be extended with extra poles to achieve working heights of up to 7.25m (24ft).

The ATEX Lite system is designed for use in environments where combustible dust may be present and where regular high-level cleaning is required to reduce dust accumulation on elevated surfaces.

Typical applications include food manufacturing facilities, pharmaceutical production environments, grain handling operations, chemical processing plants, powder handling facilities and other industrial workplaces operating within ATEX-classified areas.

The system is designed for the safe removal of dust and debris from elevated surfaces including:

  • Ceilings
  • Pipework
  • Ducting
  • Ventilation systems
  • Overhead beams and structures
  • Machinery exteriors
  • Wall surfaces

Other areas where combustible dust can accumulate above eye level
The kit includes a range of conductive cleaning heads and brushes to suit different cleaning tasks.

Yes. The ATEX Lite system was specifically developed as an introductory ATEX cleaning solution for facilities with occasional high-level cleaning requirements. It offers a lightweight, easy-to-use system for maintenance teams that do not require the reach of larger industrial ATEX systems.

The ATEX Lite poles are manufactured from 100% conductive carbon fibre, allowing static charges to dissipate safely during operation while providing excellent strength, rigidity and operator control.

In combustible dust environments, controlling static electricity is critical. The conductive carbon fibre construction allows static charges to dissipate safely through the system, helping support safe cleaning practices in hazardous areas while maintaining lightweight handling characteristics.

The ATEX Lite system should be used with an appropriately ATEX-certified industrial vacuum suitable for the hazardous area classification. SpaceVac commonly recommends compatible ATEX vacuum systems such as the TITAN ATEX and Mercury ACD ranges.

Yes. Additional poles can be added to extend the system beyond the standard working height, allowing operators to reach up to approximately 7.25m (24ft) from ground level when required.

No. The system is designed to allow operators to carry out high-level cleaning safely from ground level, reducing reliance on ladders, scaffolding and other access equipment for many routine cleaning tasks.

Yes. The ATEX Lite system is suitable for facilities maintenance teams, industrial cleaning contractors and specialist service providers working in hazardous dust environments who require a lightweight ATEX-compliant cleaning solution for low-to-medium-level cleaning tasks.

SpaceVac provides high-level cleaning solutions for all ATEX gas and dust zones, including Zones 0, 1, 2, 20, 21 and 22.

By combining conductive carbon fibre cleaning poles with appropriately certified vacuum systems and accessories, operators can safely remove combustible dust from elevated surfaces while remaining safely at ground level.

Compatible Certified Vacuum Units

SpaceVac ATEX systems must be paired with a certified industrial vacuum suitable for the hazardous zone classification of your facility. Select from our compatible ATEX-rated vacuum units below to ensure safe operation and regulatory compliance.
  • Mercury 2 – ACD Industrial Vacuum

    Mercury 2 – ACD Industrial Vacuum

    View Product
  • Titan 1 (US) - ATEX Vacuum

    Titan 1 (US) – ATEX Vacuum

    View Product
  • Titan 2 US

    Titan 2 – Class II Division 2 Vacuum

    View Product
  • Titan 2 - ATEX Vacuum

    Titan 2 – ATEX Vacuum

    View Product

    • Accessories & Add-Ons

  • Explorer Extreme ATEX Camera System

    Explorer Extreme ATEX Camera System

    View Product
  • 38mm ATEX Oven Kit

    38mm ATEX Oven Kit

    View Product
  • ATEX Food Safe Kit

    ATEX Food Safe Kit

    View Product

    • Explore the ATEX Pole Systems

    SpaceVac ATEX cleaning equipment combines lightweight carbon fibre poles with certified vacuum systems and specialist tools for safe, compliant high-level cleaning in hazardous environments from the ground.

    ATEX Lite

    ATEX Lite

    Practical ATEX High-Level Cleaning for Occasional Use

    The ATEX Lite Pole System is designed for occasional cleaning at lower working heights in combustible dust environments.

    Manufactured in the UK at an IECEx-certified facility, its lightweight conductive carbon fibre poles provide easy handling and support static dissipation when paired with appropriately certified equipment.

    With a standard working height of 4.75m, extendable to 7.25m, the system enables operators to clean overhead pipework, ceilings, vents and ducting from ground level.

    Max Working Height: 4.75m / 15ft
    Shop Products
    ATEX Pioneer

    ATEX Pioneer

    Flexible ATEX High-Level Cleaning with Extended Reach

    The ATEX Pioneer Pole System provides a mid-range solution for professional cleaning in combustible dust environments.

    Manufactured in the UK at an IECEx-certified facility, its lightweight conductive carbon fibre poles combine manoeuvrability with the reach required for more demanding overhead cleaning.

    With a standard working height of 6.6m, extendable to 9.8m, the system enables operators to remove dust and debris from elevated pipework, beams, ducting and other difficult-to-access surfaces from ground level.

    Max Working Height: 6.6m / 21ft
    Shop Products
    ATEX Pro 38mm

    ATEX Pro 38mm

    Professional Reach, Precision and Control

    The ATEX Pro 38mm Pole System is designed for demanding high-level cleaning applications where reach, rigidity and manoeuvrability are essential.

    Manufactured in the UK at an IECEx-certified facility, its lightweight, high-modulus conductive carbon fibre poles provide excellent control when cleaning around overhead pipework, ducting and production equipment.

    With a standard working height of 9.8m, extendable to 13m, the system provides the reach and stability required for regular professional cleaning in hazardous environments.

    Max Working Height: 9.8m / 32ft
    Shop Products
    ATEX Pro 50mm

    ATEX Pro 50mm

    Heavy-Duty ATEX Cleaning with Increased Airflow

    The ATEX Pro 50mm Pole System is designed for demanding industrial environments where increased airflow is required to remove heavier combustible dust deposits and debris.

    Manufactured in the UK at an IECEx-certified facility, its 50mm high-modulus conductive carbon fibre poles provide the strength and rigidity required for professional high-level cleaning.

    With a standard working height of 9.8m, extendable to 13m, the system is suited to cleaning overhead pipework, beams, ducting and production equipment in hazardous environments.

    Max Working Height: 9.8m / 32ft
    Shop Products
    ATEX Ultra

    ATEX Ultra

    Certified high-level cleaning for hazardous environments. The SpaceVac ATEX Ultra system is the most advanced high-reach solution within the ATEX cleaning range, designed for facilities requiring safe cleaning at significant height.

    Manufactured using ultra-high modulus carbon fibre construction, the Ultra system delivers exceptional strength and rigidity while remaining lightweight for the operator. This allows operators to safely remove combustible dust from overhead structures such as beams, ducting, pipework and production equipment while maintaining full ATEX compliance.

    US Specification: For customers requiring the US version, ATEX poles are manufactured with a dual locking-hole design to meet US specifications and ensure compatibility with US pole systems.

    Compatible Vacuums:

    • UK: Titan 2 (110v/230v), Mercury 2 (110v/230v)
    • US: Titan 1 (110v), Titan 2 (RGS), Mercury 2 (110v)
    • Rest of the world: Titan 2 (230v), Mercury 2 (230v). 110v is available on both models if required.
    Max Working Height: 16m / 52ft
    Shop Products

    Compatible Certified Vacuum Units