ATEX cleaning equipment for high level cleaning in hazardous environments
Facilities operating in hazardous environments where combustible dust or flammable gases are present require specialist ATEX cleaning equipment designed to meet strict safety standards.
Dust accumulation on high-level surfaces such as pipework, ducting, cable trays and structural beams can create serious fire and explosion risks if not properly managed.
SpaceVac ATEX cleaning equipment provides a safe and effective solution for removing dust and debris from elevated areas.
Using lightweight carbon fibre pole systems combined with ATEX-certified industrial vacuum units, operators can carry out high level cleaning from ground level while maintaining full compliance with hazardous area safety requirements.
This allows cleaning to be completed safely without the need for working at height or introducing ignition risks into sensitive environments.
SpaceVac pole systems are manufactured to IECEx standards and are designed to work alongside certified vacuum systems for use in ATEX and IECEx classified gas and dust zones.
Book a Demo
Safer, Smarter Internal High Level Cleaning Pole Kits
Ground-Level Cleaning Without Compromise
Clean elevated surfaces without working at height using lightweight pole systems, reducing risk while maintaining full operational safety.
Safe Cleaning in Hazardous Areas
Carry out high level cleaning safely in explosive atmospheres using certified ATEX cleaning equipment, designed for use in hazardous gas and dust zones.
Lightweight Carbon Fibre Performance
Engineered from advanced carbon fibre for maximum strength with minimal weight, reducing operator fatigue and improving control.
Engineered for Safety and Reliability
Manufactured to IECEx standards, our systems deliver consistent, controlled performance in demanding hazardous environments.
Manufactured in the UK
Designed and produced in the UK to the highest quality standards, ensuring durability and performance you can trust.
ATEX-Compliant System Design
Our ATEX cleaning equipment is designed to work with certified vacuum units, ensuring safe use in regulated environments.
Trusted by
Safe cleaning in hazardous environments from the ground
SpaceVac ATEX cleaning equipment combines lightweight carbon fibre poles with certified vacuum systems and specialist tools for safe, compliant high-level cleaning.
ATEX Lite
Practical ATEX High-Level Cleaning for Occasional Use
The ATEX Lite Pole System is designed for occasional cleaning at lower working heights in combustible dust environments.
Manufactured in the UK at an IECEx-certified facility, its lightweight conductive carbon fibre poles provide easy handling and support static dissipation when paired with appropriately certified equipment.
With a standard working height of 4.75m, extendable to 7.25m, the system enables operators to clean overhead pipework, ceilings, vents and ducting from ground level.
ATEX Pioneer
Flexible ATEX High-Level Cleaning with Extended Reach
The ATEX Pioneer Pole System provides a mid-range solution for professional cleaning in combustible dust environments.
Manufactured in the UK at an IECEx-certified facility, its lightweight conductive carbon fibre poles combine manoeuvrability with the reach required for more demanding overhead cleaning.
With a standard working height of 6.6m, extendable to 9.8m, the system enables operators to remove dust and debris from elevated pipework, beams, ducting and other difficult-to-access surfaces from ground level.
ATEX Pro 38mm
Professional Reach, Precision and Control
The ATEX Pro 38mm Pole System is designed for demanding high-level cleaning applications where reach, rigidity and manoeuvrability are essential.
Manufactured in the UK at an IECEx-certified facility, its lightweight, high-modulus conductive carbon fibre poles provide excellent control when cleaning around overhead pipework, ducting and production equipment.
With a standard working height of 9.8m, extendable to 13m, the system provides the reach and stability required for regular professional cleaning in hazardous environments.
ATEX Pro 50mm
Heavy-Duty ATEX Cleaning with Increased Airflow
The ATEX-certified Pro 50mm Pole System is designed for demanding industrial environments where increased airflow is required to remove heavier combustible dust deposits and debris.
Manufactured in the UK at an IECEx-certified facility, its 50mm high-modulus conductive carbon fibre poles provide the strength and rigidity required for professional high-level cleaning.
With a standard working height of 9.8m, extendable to 13m, the system is suited to cleaning overhead pipework, beams, ducting and production equipment in hazardous environments.
ATEX Ultra
Certified high-level cleaning for hazardous environments. The SpaceVac ATEX Ultra system is the most advanced high-reach solution within the ATEX cleaning range, designed for facilities requiring safe cleaning at significant height.
Manufactured using ultra-high modulus carbon fibre construction, the Ultra system delivers exceptional strength and rigidity while remaining lightweight for the operator. This allows operators to safely remove combustible dust from overhead structures such as beams, ducting, pipework and production equipment while maintaining full ATEX compliance.
US Specification: For customers requiring the US version, ATEX poles are manufactured with a dual locking-hole design to meet US specifications and ensure compatibility with US pole systems.
Compatible Vacuums:
- UK: Titan 2 (110v/230v), Mercury 2 (110v/230v)
- US: Titan 1 (110v), Titan 2 (RGS), Mercury 2 (110v)
- Rest of the world: Titan 2 (230v), Mercury 2 (230v). 110v is available on both models if required.
Comparing the ATEX range
Compatible ATEX-Certified Vacuum Units
SpaceVac ATEX systems must be paired with a certified industrial vacuum suitable for the hazardous zone classification of your facility. Select from our compatible ATEX-rated vacuum units below to ensure safe operation and regulatory compliance.
Mercury 2
Powerful Dust Collection for Non-Hazardous Industrial Environments
The SpaceVac Mercury 2 is a dual-motor ACD industrial vacuum designed for collecting combustible dust in non-classified areas where ATEX-certified equipment is not required. Featuring a 2.3 kW motor rating, 45-litre stainless steel collection tank and high-efficiency star filter with HEPA secondary filtration, it delivers reliable performance for demanding industrial cleaning applications.
Compatible with selected SpaceVac high-level cleaning pole systems, the Mercury 2 can also remove dust from overhead pipework, beams and ducting while operators remain safely at ground level.
Titan 1 – US only
Single-Motor ATEX Vacuum for Industrial Dust Collection
The SpaceVac Titan 1 is a single-motor industrial vacuum designed for combustible dust collection in appropriately classified hazardous environments. Its wheeled design makes it a practical solution for industrial facilities requiring reliable dust collection equipment.
The vacuum features a 1.1 kW motor, durable AISI 304 stainless steel collection tank and star filter with easy filter replacement for straightforward maintenance. An earth grounding provision supports static electricity control during operation.
When paired with compatible SpaceVac ATEX Lite or Pioneer high-level cleaning pole systems, the Titan 1 enables operators to remove combustible dust from overhead pipework, structural beams and other difficult-to-reach surfaces while remaining at ground level.
Titan 2 – US Only
Industrial Dust Collection for Class II, Division 2 Hazardous Locations
The SpaceVac Titan 2 is a dual-motor industrial vacuum designed for combustible dust collection in Class II, Division 2 hazardous locations. Built with durable stainless steel construction, it provides a practical solution for industrial facilities where appropriately rated dust collection equipment is required.
Its independently switchable motors allow operators to adjust performance to the application, while the star filter and lateral manual filter shaker support efficient filtration and straightforward maintenance. A pressure relief valve provides additional motor protection during operation.
With a compact, mobile design and integrated pole and tool storage, the Titan 2 can also be paired with compatible SpaceVac high-level cleaning systems to remove combustible dust from overhead pipework, structural beams and other difficult-to-reach surfaces while operators remain at ground level.
Titan 2
ATEX-Certified Industrial Vacuum for Zone 22 Environments
The SpaceVac Titan 2 is a powerful dual-motor ATEX industrial vacuum designed for the safe collection of combustible dust in Zone 22 hazardous environments.
With a 2.3 kW motor rating, 60-litre stainless steel collection tank and high-efficiency star filter with HEPA secondary filtration, it provides robust dust collection for demanding industrial applications.
Compatible with SpaceVac ATEX high-level cleaning pole systems, Titan 2 enables operators to remove combustible dust from overhead pipework, beams and other elevated surfaces while remaining at ground level.
Suitable for a wide range of industries
ATEX Zones Explained
Hazardous environments are classified into ATEX zones based on the level of risk from flammable gases or combustible dust.
Gas Zones
- Zone 0: Explosive atmosphere present continuously or for long periods
- Zone 1: Likely to occur during normal operation
- Zone 2: Unlikely, but possible for short durations
Dust Zones
- Zone 20: Combustible dust present continuously
- Zone 21: Likely during normal operation
- Zone 22: Occurs occasionally and for short periods
Using correctly specified ATEX cleaning equipment ensures safe cleaning in these environments without increasing the risk of ignition.
Read more
Reduce Explosion Risk from Combustible Dust
Combustible dust is one of the leading causes of industrial fires and explosions.
Dust accumulation on high-level surfaces can:
- Become airborne during disturbance
- Ignite when exposed to sparks or heat sources
- Lead to serious damage to facilities and equipment
Using professional explosion proof cleaning equipment helps remove dust safely at source, reducing the risk of ignition and protecting both people and infrastructure.
Regular high-level cleaning is essential for maintaining a safe working environment in hazardous industries.
Where Combustible Dust Accumulates in Hazardous Environments
These systems are commonly used in industries where combustible dust accumulation presents a serious safety risk.
Effective use of ATEX cleaning equipment helps facilities manage dust build-up and maintain safer working conditions in hazardous environments.
Typical high-level dust accumulation areas include:
- Overhead pipework and ducting
- Cable trays and lighting fixtures
- Structural beams and roof trusses
- Ventilation systems and extraction ducting
- Equipment frameworks and conveyors
Regular high level cleaning using hazardous area cleaning equipment helps reduce combustible dust risks, support compliance and ensure safer day-to-day facility operation.
